infant seat
Joie Mint Latch Baseless Infant Car Seat Review
by joie

The Mint Latch skips the base and clicks straight into your car's lower anchors, which makes it a smart pick for taxis, rideshares and families who switch cars, but you re-install and re-check the recline every trip, the height limit is less than 30 inches and it fits Joie strollers only.
- Rear-facing
What we like
There's no base to buy or store: the built-in rigid lower anchors click on with two audible clicks and show green when attached, and you set the recline by rotating the anchors. That makes it easy to move between cars, taxis and rideshares.
It also installs with a lap/shoulder or lap-only belt, it's certified for airplane use, and the infant insert with a low-birth-weight pillow suits small babies until 11 pounds. Joie says it meets FMVSS 213a and 213b.
Worth knowing
Without a base, every trip is a fresh install, so you check the indicators, the level line and the tightness each time. There's no load leg or anti-rebound bar, and the carrier is on the heavy side at about 9.3 pounds (Joie).
The height limit is less than 30 inches, the harness has to be rethreaded by hand, it works with Joie strollers only, and its 7-year life counts from the original purchase, so keep your receipt.
❮ Return to Best Infant Car Seats
Most infant seats live on a base that stays in your car. The Joie Mint Latch doesn’t have one. Instead, the rigid lower-anchor connectors are built into the carrier itself, so you click the whole seat straight onto your car’s lower anchors, then unclick it and take it with you.
That makes it a natural fit for city families, taxi and rideshare trips, grandparents’ cars and anyone who doesn’t want to buy a base for every vehicle. The trade-off is just as simple: every trip is a fresh install, so you check the angle and the tightness every time.
We built this review from Joie’s US owner’s manual (IM-001413G), Joie’s US product page and NHTSA’s recall records. We haven’t installed or crash-tested the Mint Latch ourselves, and every size limit here comes from that manual.
Our verdict: a well-made baseless seat for families on the move. Choose it if you’ll switch cars often and you’re happy with a Joie stroller; skip it if you want a base that stays put, or if you expect a tall baby.
Why a baseless infant seat?
An infant seat is shaped for newborns, and it lets you carry a sleeping baby from the car to the stroller. Usually that convenience comes from the base: install it once, and the carrier clicks in and out in seconds.
A baseless seat moves the “install” part onto the carrier. You lose the stay-in-car base, but you gain a seat that installs the same way in any car with lower anchors, and with a seat belt in cars without them. There’s nothing extra to carry, store or buy for a second car.
Key features of the Joie Mint Latch
- Rear-facing from 4 to 30 lb and less than 30 inches, per Joie’s manual
- Built-in rigid lower anchors that rotate out from the carrier, with green indicators and two audible clicks
- Recline set by rotating the anchors, using the level line on the carrier
- Also installs with a lap/shoulder belt or a lap belt only
- Certified for airplane use
- Infant insert with a low-birth-weight pillow, used until 11 lb
- Joie says it meets FMVSS 213a (the side-impact standard) and 213b
- About 9.3 lb carrier (Joie)
- 7-year life, counted from the original purchase

Image: Joie
How the Mint Latch differs from the Joie Rue
There’s no older Mint Latch on our site, so the useful comparison is Joie’s other infant seat, the Joie Rue. They share a lot, and the differences are all about the base.
| Joie Mint Latch | Joie Rue | |
|---|---|---|
| Base | None; rigid lower anchors built into the carrier | Stay-in-car base with a lock-off |
| Limits | 4–30 lb, less than 30 in | 4–30 lb, less than 30 in |
| Infant insert | Out at 11 lb | Out at 11 lb |
| Carrier weight | About 9.3 lb (Joie) | About 7.8 lb (Joie) |
| Anti-rebound bar | None (no base) | Joie says it’s built into the base |
| Side impact | Joie says FMVSS 213a and 213b | Joie says FMVSS 213a and 213b |
| Expiry | 7 years after original purchase | 7 years after original purchase |
| Price band | Average | Low |
In short: the Rue is lighter and cheaper and has a base; the Mint Latch carries its own connectors, so it’s heavier in your arms but faster to move between cars.
What are the size limits?
Limits from Joie’s Mint Latch US manual (IM-001413G). Chart: BestCarSeatHub.
The Mint Latch is rear-facing only. The manual says, “NEVER use this child restraint forward-facing.” Your baby can ride in it while:
- They weigh 4 to 30 pounds, and
- They’re less than 30 inches tall, and
- The top of their head is at least 1 inch below the top of the seat.
Stop using it as soon as your baby reaches the weight limit or the height limit, whichever comes first. The harness straps sit at or just below the shoulders, and you change their height by rethreading them.
Be plain with yourself about the height limit. Less than 30 inches is the same as the Rue, but 2 inches short of 32-inch seats like the Evenflo LiteMax 30 and Graco SnugRide SnugFit DLX. Many babies outgrow an infant seat by height before they reach 30 pounds. When that happens, move to a rear-facing convertible. Our guide to rear-facing height and weight limits explains why both numbers matter.
Inserts for newborns
The infant insert, with a low-birth-weight pillow inside it, gives smaller babies a snug fit. It must come out once your baby reaches 11 pounds. The separate head support is optional; its straps go only in the top two harness slot positions. For a preterm baby or one under 5 pounds, Joie recommends following AAP guidance and asking your doctor before the first trip.
How safe is the Joie Mint Latch?
Federal standards: the manual says the Mint Latch conforms to all applicable Federal Motor Vehicle Safety Standards. Joie says the Mint Latch meets FMVSS 213a (the side-impact standard) and 213b. That claim is on Joie’s product page, not in the manual, and we didn’t test it. FMVSS 213a applies to seats made on or after December 5, 2026.
No base means no load leg and no anti-rebound bar. Those features live on bases, and the Mint Latch doesn’t have one. If either is a must for you, look at our safest infant car seats list.
After a crash: Joie’s rule is clear. Never use the seat after a moderate or severe crash. After a minor crash, the manual allows you to keep using it only if all five of these are true:
- The vehicle could be driven away from the crash.
- The vehicle door nearest the car seat wasn’t damaged.
- No one in the vehicle was injured.
- The airbags didn’t deploy.
- There’s no visible damage to the car seat.
If you’re unsure, contact Joie.
Recalls: we found no recall when we checked (November 2026). Search your seat’s model number at nhtsa.gov/recalls and register it with Joie.
The 7-year life starts at purchase
The manual says: “DO NOT USE THIS CHILD RESTRAINT 7 YEARS AFTER ORIGINAL PURCHASE.” If you don’t know the purchase date, use the manufacture date on the seat. Keep your receipt.
How hard is it to install?
The manual’s rule: install with either the rigid lower anchors or the vehicle seat belt. “Both are safe to use.” Use only one method, never both. The vehicle seat must face forward.
With the built-in rigid lower anchors
This is the Mint Latch’s party trick. Fit the guides onto your car’s lower anchors, press the rotate button to swing the anchors down, and push them on until you hear two clicks and both indicators are completely green.
Then set the recline: rotate the anchors until the level line on the carrier is level with the ground. Finish with the 1-inch test at the belt path. To take it out, squeeze the release lever on the back of the carrier and fold the anchors back into storage. Don’t remove the anchors from the seat.
With a seat belt
No lower anchors? Use a lap/shoulder belt or a lap belt only. The manual shows one belt path: thread the vehicle’s lap belt under both lap-belt guides, get the level line level (a rolled towel or pool noodle is allowed), press down, tighten and lock the belt, or use a locking clip. Keep the rigid anchors folded away in storage while you do it.
Some belts can’t be used: motorized belts, inflatable belts, door-mounted belts, and non-locking lap-only belts unless you add a belt-shortening clip. Our taxi and rideshare guide has more tips.
On an airplane
The manual says: “This child restraint is certified for airplane use.” Install it rear-facing with the aircraft lap belt under both lap-belt guides. Check with your airline before you travel. See our airplane car seat guide.
Living with a baseless seat

Image: Joie
Here’s the honest everyday picture. With a base, you get the install right once and then just click in. With the Mint Latch, every trip is an install: two clicks, green indicators, level line, 1-inch test. It quickly becomes routine, but don’t skip it on a rushed morning.
The carrier is also on the heavier side at about 9.3 pounds (Joie), because the connectors travel with it. The handle has three positions, and Joie recommends the carry position in the vehicle.
Stroller compatibility
The manual says to use it only with Joie strollers or Joie adapters made for Joie strollers, and that adapters come with Joie strollers. Joie sells it as a travel system with the Ginger DLX pramette stroller; see our Joie Ginger DLX + Mint Latch review. If you already own another brand’s stroller, this seat isn’t for you. See our travel system picks.
How it compares
| Joie Mint Latch | Joie Rue | Evenflo LiteMax 30 | Graco SnugRide SnugFit DLX | |
|---|---|---|---|---|
| Base | None (built-in rigid latch) | Yes, lock-off | Yes, lock-off | Yes, with anti-rebound bar |
| Limits | 4–30 lb, less than 30 in | 4–30 lb, less than 30 in | 3–30 lb, 32 in | 4–30 lb, 32 in |
| Carrier weight | About 9.3 lb (Joie) | About 7.8 lb (Joie) | About 7.4 lb (Safe in the Seat) | About 9.8 lb (Safe in the Seat) |
| Price band | Average | Low | Low | Average |
The Mint Latch wins on moving between cars. Every seat with a base wins on day-to-day speed in one car.
Best Car Seat Hub’s final verdict

- No base needed: rigid lower anchors are built into the carrier
- Green indicators and two clicks confirm the latch install
- Also installs with a lap/shoulder or lap-only belt
- Certified for airplane use
- Joie says it meets FMVSS 213a and 213b
- Infant insert with a low-birth-weight pillow for small babies

- Re-install and re-check the recline every trip
- Height limit is less than 30 inches
- No load leg or anti-rebound bar (there’s no base)
- Heavier carrier than the Rue, at about 9.3 lb
- Joie strollers only
- Rethread harness, and the 7-year life counts from purchase
Who it’s for
City families, frequent taxi and rideshare riders, and anyone who moves a baby between several cars. It’s a great fit if you’d otherwise buy two or three bases, and if a Joie stroller suits you.
Who should skip it
- One-car families who’d rather install once and click in every day. A seat with a base, like the Joie Rue, is quicker.
- Parents expecting a tall baby. A 32-inch seat gives more time.
- Anyone who wants a load leg or anti-rebound bar.
- Anyone set on a non-Joie stroller.
Want to see how it ranks? Head back to our safest infant car seats list.
Frequently asked questions
What are the Joie Mint Latch’s limits? 4 to 30 pounds and less than 30 inches tall, rear-facing only, with the top of the head at least 1 inch below the top of the seat.
Does the Mint Latch need a base? No. It has rigid lower anchors built in, and it also installs with a lap/shoulder or lap-only seat belt.
Is it FAA approved? The manual says it’s certified for airplane use. Check with your airline.
When does the infant insert come out? At 11 pounds.
When does it expire? 7 years after original purchase. Keep your receipt.
Does it meet the side-impact standard? Joie says it meets FMVSS 213a and 213b. The manual says it conforms to all applicable federal standards.
- Seat type
- Rear-facing-only baseless infant seat with built-in rigid lower anchors; never forward-facing
- Weight limit
- 4–30 lb
- Height limit
- Less than 30 in (top of the head at least 1 in below the top of the seat)
- Harness position
- At or just below the shoulders
- Infant insert
- With a low-birth-weight pillow; must come out at 11 lb
- Head support
- Optional; its straps go in the top two harness slots only
- Harness
- Rethread by hand
- Install
- Built-in rigid lower anchors, lap/shoulder belt or lap belt only; one method at a time, never both
- Belt path
- Vehicle lap belt under both lap-belt guides
- Recline
- Set by rotating the rigid anchors (latch install); rolled towel or pool noodle allowed for belt and aircraft installs
- Base
- None (no load leg or anti-rebound bar)
- Handle
- 3 positions; Joie recommends the carry position in the vehicle
- Carrier weight
- About 9.3 lb (Joie)
- Dimensions
- 27.75 x 17.75 x 23.25 in (Joie)
- Strollers
- Joie strollers only, or Joie adapters made for Joie strollers
- FAA
- Certified for airplane use, with the aircraft lap belt
- Federal standard
- Manual: all applicable FMVSS. Joie says it meets FMVSS 213a and 213b
- Useful life
- 7 years after original purchase (keep your receipt)
- Owner's manual
- Joie mint latch US manual IM-001413G