infant seat
CYBEX Aton G2 with Load Leg Base Review
by cybex

The Aton G2 keeps the light 9 lb Aton carrier and its load leg, and adds 2 more inches of height, a no-rethread headrest, SensorSafe and FMVSS 213b certification, though it holds 5 lb less than the Aton 2 and Aton M.
- Rear-facing
What we like
The load leg on the base helps minimize crash forces on a child in a frontal crash, according to the manual, and a SafeLock belt tensioner handles lower-anchor and seat-belt installs. The height limit is 2 inches more than the old Aton 2 and Aton M.
The SensorSafe chest clip is included, the harness never needs rethreading (11-position headrest), and the carrier works with every CYBEX stroller using the stroller's included adapters. It has a 6-year useful life and a 2-year warranty.
Worth knowing
The 30 pound limit is 5 pounds less than the Aton 2 and Aton M, so a heavy baby may outgrow it sooner. It sits in the premium price band, and extra bases are sold separately.
Some vehicles don't allow a load leg in every seating position, there's no anti-rebound bar (only an optional anti-rebound handle position), and SensorSafe needs the CYBEX phone app.
CYBEX’s Aton has long been the infant seat for parents who want a light, compact carrier with a European-style load leg. The Aton G2 with Load Leg Base is the current version of that carrier: a 9 lb seat for babies from 4 to 30 pounds and up to 32 inches, on a load-leg base, with SensorSafe built in.
This page replaces our old reviews of the Aton 2 and Aton M. Every size limit here comes from CYBEX’s current Aton G2 owner’s manual.
Our verdict: the Aton G2 is a well-equipped, travel-friendly premium carrier. It gives you more height room, a no-rethread headrest and the newest federal certification, but it holds 5 lb less than the old Aton 2 and Aton M.
If you came here looking for the Aton 2 or Aton M, read the recall note below first.
Own an older CYBEX Aton 2 or Aton M? Read this first
CYBEX recalled certain Aton, Aton 2, Aton M, Aton Q and Cloud Q infant seats (including SensorSafe versions) made between June 6, 2017 and November 1, 2020 (NHTSA campaign 23C-001, about 31,080 seats). The webbing on the front harness-adjuster strap can fray and lose strength, which means the seats don’t meet federal standards FMVSS 213 and 209. CYBEX’s fix is a free replacement harness-adjuster strap kit: call 1-877-242-5676.
Check your seat: the model number and the date of manufacture are on the label on the bottom of the seat. Affected model numbers start with 514 (Aton), 515 or 519/521 SensorSafe (Aton 2), 518 or 519 (Aton M), 515/517 (Aton Q) and 515 or 519/521 SensorSafe (Cloud Q).
Check the expiry too. CYBEX rates these seats for 6 years from the date of manufacture. Every seat in this recall was made on or before November 1, 2020, so every one of them had passed its 6-year limit by November 1, 2026. Don’t use an expired seat, even if it got the repair kit. CYBEX recommends recycling an expired seat rather than selling or giving it away. Seats with an unknown history shouldn’t be used either.
The Aton 2 and Aton M are no longer sold in the US. The rest of this page covers the Aton G2, the current version of CYBEX’s Aton carrier. (CYBEX’s own site points Aton M shoppers to its Cloud G Lux, a different seat. We compare the G2 here because it’s the same light Aton carrier the Aton 2 and Aton M were built on.)
Key features of the CYBEX Aton G2
- Rear-facing from 4 to 30 lb and less than 32 inches tall
- Load-leg base with the SafeLock belt tensioner
- No-rethread harness with an 11-position headrest
- SensorSafe chest clip included
- Installs without the base; FAA certified without the base
- GREENGUARD Gold fabrics, with no added fire-retardant chemicals (CYBEX)
- 6-year useful life and a 2-year warranty
What changed from the Aton 2 and Aton M
According to CYBEX’s manuals and product pages:
| Aton 2 | Aton M | Aton G (retired) | Aton G2 | |
|---|---|---|---|---|
| Weight limit | 4–35 lb | 4–35 lb | 4–35 lb | 4–30 lb |
| Height limit | 17–30 in | Up to 30 in | 17–32 in | Less than 32 in |
| Carrier weight | 9 lb | 10.9 lb | 9 lb | 9 lb |
| Width | 17.25 in | 17.3 in | 17.5 in | 17.5 in |
| Load leg | Yes | Yes | No | Yes |
| Federal standard | Earlier FMVSS 213 | Earlier FMVSS 213 | Earlier FMVSS 213 | FMVSS 213b |
| Recall | 23C-001 | 23C-001 | 25C-002 | None found |
Less weight capacity (35 → 30 lb), more height (30 → 32 in)
Let’s be plain: the Aton G2 holds 5 pounds less than the Aton 2 and Aton M. A heavy baby would have had more time in the old seats.
What the G2 adds is height. The limit goes from 30 inches to less than 32 inches, and the head rule now measures from the top of the shell or the headrest, whichever is higher. As general guidance, most babies outgrow an infant seat by height or head room before they hit the weight limit, so the extra 2 inches often matters more than the lost 5 pounds. Your baby’s build decides it.
Built to the updated federal standard
The G2’s manual says it meets FMVSS 213b, the updated federal standard (including side-impact testing) that applies to seats made on or after December 5, 2026. The Aton 2, Aton M and Aton G were certified to the earlier version of FMVSS 213.
SensorSafe is standard, plus a no-rethread headrest
SensorSafe used to be a separate version; on the G2 it comes in the box. The harness moves with an 11-position headrest, the base has the SafeLock belt tensioner, and the load leg stays.
Can I use my old Aton 2 or Aton M base?
No source says an old base fits the G2. CYBEX names only the Aton G2 Load Leg Base, so use only an Aton G2 base. Never put an old base from a recalled or expired seat back into service.
What about the Aton G?
The in-between Aton G (4–35 lb, no load leg) is no longer sold, and CYBEX lists the Aton G2 as its new version. The Aton G has its own recall (NHTSA 25C-002, about 23,273 seats): the harness hip-anchor retention hooks can bend and let the harness anchor pin loosen. CYBEX sends a free remedy kit. CYBEX’s notice covers Aton G, Aton G Swivel (including SensorSafe) and Aton G travel systems made between February 20, 2023 and May 10, 2024; check your model number on CYBEX’s recall page or at nhtsa.gov. The Aton G2 isn’t part of this recall.
What are the size limits of the Aton G2?
The Aton G2 is rear-facing only. Per the owner’s manual, your baby can ride in it while:
| Rear-facing | Aton G2 |
|---|---|
| Weight | 4–30 lb |
| Height | Less than 32 in |
| Head | At least 1 in below the top of the shell or headrest, whichever is higher |
| Harness | At or just below the shoulders |
| Infant insert | Until about 11 lb or about 3 months |
Stop using it as soon as your baby passes any of these limits. CYBEX requires the AAP car-seat evaluation for babies born before 37 weeks or under 5 lb at birth.
A note on “35 lb”: a few illustrations in the Aton G2 manual reproduce warning-label artwork that says 4–35 lb. That artwork is carried over from the older Aton G (it carries the same artwork code in the Aton G manual). Every written limit in the Aton G2 manual, the recline indicator on the base, the safety checklist and CYBEX’s spec page say 4–30 lb. Go by 4–30 lb. If the label on your own seat says something different, call CYBEX at 1-877-242-5676 before using it.
For why both limits matter, see our guide to height and weight limits for rear-facing seats.
How big is it, and will it fit your car?
CYBEX lists the carrier at 9 pounds, 17.5 inches wide, 26.1 inches long and 14.7 to 22.8 inches tall. That’s about the same as the Aton 2 and lighter than the Aton M, but not the lightest premium carrier, so plan on a stroller for long walks. For tight back rows, see our three-across guide.
The load leg is the fit question to check. Some vehicle makers don’t allow load legs in every seating position, and the floor must be flat (an under-floor storage bin or a center hump can rule it out). If so, you can use the base with the leg stored, pick another position, or install without the base.
How safe is the Aton G2?

Image: CYBEX
The load leg is the headline. The manual says it “helps minimize crash forces on a child in a frontal crash” and that using it is strongly recommended. CYBEX says it reduces crash forces on the child by up to 30%, compared with the same seat without the load leg. We haven’t crash-tested it ourselves.
Side impact: CYBEX says, “Integrated directly into the seat’s Energy Absorbing Shell, the innovative Linear Side-Impact Protection System (L.S.P.) effectively reduces crash force on the child in the event of a side impact collision.”
Anti-rebound: there’s no anti-rebound bar on the base. The handle has five locked positions, including an optional anti-rebound position (0), and it must always be locked in one of them in the car.
SensorSafe works with the CYBEX app: it reminds you that your child is still in the car, alerts you if the chest clip is opened while driving, and shows the temperature inside the car.

Image: CYBEX
Recalls: we found no recall for the Aton G2 on CYBEX’s recall page or NHTSA as of our last check. Register your seat so CYBEX can reach you. Like every seat, it must be replaced after any crash, even if it was unoccupied, and it expires 6 years from its date of manufacture (on labels under the carrier and on the base).
How hard is it to install?
With the base
The base installs with its lower anchor straps (flexible connectors, not rigid ones) or with a lap-shoulder or lap-only vehicle belt. In every case you close the SafeLock tensioner until it clicks and its indicator turns green. The manual sets no separate lower-anchor weight limit, and you should never use the lower anchors and the belt together. In the center seat, borrowed inner anchors are only allowed if they’re 11 to 20 inches apart and your vehicle maker allows it.
Check that the recline indicator is in the blue zone (one zone for every child from 4 to 30 lb), with the car on level ground. Then extend the load leg until its foot sits flat, using the first hole that locks firmly, and make sure its indicator turns green. Never let the leg lift the base off the vehicle seat.
Without the base

Image: CYBEX
For taxis and second cars, the manual’s preferred method is European routing: the lap belt goes through the blue lap guides, and the shoulder belt goes over the handle, around the back of the carrier and into the rear shoulder-belt guide. There’s an alternate routing and a lap-only method too. Get the white level line level with the ground (a rolled towel or pool noodle may help). It has more steps than a base install, so practice before your first trip.
On an airplane
The carrier is certified for aircraft without the base. Use a window seat, route the plane’s lap belt through both lap guides, and gate-check the base. More tips are in our airplane car seat guide.
Need help? The manual says CYBEX has car seat technicians you can reach at 1-877-242-5676, including virtual appointments. You can also find a local technician through Safe Kids Worldwide.
Comfort and everyday use
The harness and headrest adjust together, so there’s no rethreading as your baby grows. The infant insert’s side wings fold in for smaller babies, the canopy is the extra-large “XXL” type, and the cover, pads and insert are machine-washable. SensorSafe depends on your phone and the app, so treat it as a backup, not a replacement for checking the back seat.
Stroller compatibility, and the Swivel version
CYBEX says the Aton G2 clicks into any CYBEX stroller with the adapters that come with the stroller. Many other brands sell their own adapters, so check your stroller maker’s list before you buy.
Aton G2 or Aton G2 Swivel? It’s the same seat; the Swivel’s base rotates 180°, and it costs more. Both are 4–30 lb and less than 32 in, per their manuals (one FAQ on CYBEX’s Swivel page says 35 lb; go by the manual). Pick the Swivel if your back needs it and your budget allows.
How it compares
The Chicco KeyFit Max has the same 30 lb / 32 in limits, an anti-rebound bar and a lower price band, but no load leg. The UPPAbaby Mesa V3 also tops out at 30 lb and 32 in, and suits UPPAbaby stroller families. The Nuna PIPA series is the other premium infant seat parents most often cross-shop; check its current limits on Nuna’s site.
BestCarSeatHub’s final verdict

- Load-leg base, with a green indicator
- More growing room: less than 32 inches, 2 inches more than the Aton 2 and Aton M
- SensorSafe included, plus a no-rethread 11-position headrest
- Certified to FMVSS 213b, the updated federal standard
- Travel-friendly: 9 lb carrier, European baseless routing, FAA certified without the base
- SafeLock tensioner for every base install

- 30 lb weight limit, 5 lb less than the Aton 2 and Aton M
- Premium price band, and extra bases are sold separately
- The load leg won’t work in every seating position
- No anti-rebound bar (only an optional anti-rebound handle position)
- Baseless install takes practice
- Old Aton bases aren’t confirmed to fit
Who it’s for
Parents who want a light, compact carrier with a load leg and smart alerts, especially CYBEX stroller owners and families who travel or take taxis. It’s a good fit if you expect a tall baby, since height usually runs out first.
Who should skip it
- Families with a heavy but shorter baby. A 35 lb seat may last longer.
- Anyone on a budget. The KeyFit Max covers the same size range for less.
- Drivers whose back seat can’t take a load leg, unless you’re happy to use the base with the leg stored.
- Anyone still using an Aton 2 or Aton M from the recall window. Those seats have expired; retire and recycle them.
Want to see how it ranks against other infant seats? Head back to our safest infant car seats list.
- Seat type
- Rear-facing-only infant seat (carrier with load-leg base)
- Rear-facing
- 4–30 lb, less than 32 in; top of head at least 1 in below the top of the shell or headrest, whichever is higher
- Infant insert
- Until about 11 lb or about 3 months
- Harness
- No-rethread, with an 11-position headrest
- Handle positions
- 5 locked positions, including an optional anti-rebound position
- Load leg
- Yes, on the Aton G2 Load Leg Base
- Side impact
- Linear Side-Impact Protection (L.S.P.), per CYBEX
- SensorSafe
- Included (chest clip that works with the CYBEX app)
- Carrier weight
- 9 lb (CYBEX)
- Dimensions
- 26.1 in L x 17.5 in W x 14.7–22.8 in H (CYBEX)
- Installation
- Base: lower anchor straps or vehicle belt, with the SafeLock belt tensioner; without the base: European, alternate or lap-only belt routing
- FAA
- Certified for aircraft when used without the base
- Federal standard
- FMVSS 213b (owner's manual)
- Strollers
- All CYBEX strollers, with the adapters included with the stroller (CYBEX)
- Fabrics
- GREENGUARD Gold certified; naturally flame-resistant fabric with no added fire-retardant chemicals (CYBEX)
- Useful life
- 6 years from the date of manufacture (label on the carrier and the base)
- Warranty
- 2 years from the original purchase